User Guide

Real-Time Air Quality Indicator
Good Moderate Poor
6Copyright © 2022 Dernier & Hamlyn Inc. All rights reserved.
Control Panel
Timer
(2H/4H/8H) Set the timer to have
the device turn off automatically
Auto Mode
Blue: Air Quality Good
Yellow: Air Quality Moderate
Red: Air Quality Poor
Sleep Mode
Lowest fan speed level that
is ultra-quiet
Plasma On/Off
Press the icon to toggle the plasma
purication function on or off
Filter Replacement
Indicator
After changing lter, press for
3 seconds to reset the lter life
countdown
Connectivity
1.
On your smartphone, install DH Lifelabs app and turn your Bluetooth function on.
2.
Turn the device on.
3.
Open DH Lifelabs app and add the device.
4.
When the app indicates, press and hold the Wi-Fi Indicator for 3 seconds.
5.
The app should connect to the device over your Wi-Fi network and the Wi-Fi
Indicator will illuminate amber.
To disconnect from the network, press the Wi-Fi Indicator. The device will beep
and the indicator will illuminate red.
5
On/Off
Powers the device on and off
Wi-Fi Indicator
Flashing amber: Attempting to connect
Steady amber: Connection successful
Steady red: Not connected
Connect/disconnect: Short press
Fan Speed
(1/2/3) Three fan speeds
Sciaire + HEPA can connect with your smart
device when you download the DH Lifelabs
App. Follow the steps below and/or in the App.
Works with Google Home or Amazon Alexa.
DH Lifelabs App
GET IT ON
GET IT ON
Cleaning and Maintenance
Always unplug the device if not in use and while cleaning.
When the device is not used for an extended time, store it in
a cool dry place. Do not store the device where it might be
exposed to excess moisture or direct sunlight. May not operate
effectively in freezing temperatures. Use a dry cloth to clean the
exterior of the device. Do not use any chemicals or cleaners.
Cleaning the Air Quality Sensor
The inlet for the air quality sensor is located at the back of the
device as shown. The inlet should be cleaned every 2 months
using a vacuum or with a cotton swab that has been lightly
moistened with clean water.
AIR QUALITY SENSOR