User`s manual

-22-- 22 -
Firmware UpgradeFirmware Upgrade
New firmware, for this Receiver may become available at some point in the future to provide
enhanced features for this product. Check our website from time to time. If/When a new firmware
upgrade becomes available follow this procedure.
1. Download “upgrade file” from our web site (www.dgtec.com.au)
2. Copy “upgrade file” onto SD card.
3. Turn the main power switch on the rear panel to the OFF position. Insert the SD card into the
SD card slot in the front panel then turn the main power switch on the rear panel to the ON
position.
4. The upgrade starts automatically once the “upgrade file” on SD card is detected.
New firmware, for this Receiver may become available at some point in the future to provide
enhanced
features for this product. Check our website from time to time. If/When a new firmware
upgrade
becomes available follow this procedure.
1.
Download “upgrade file” from our web site (www.dgtec.com.au)
2.
Copy “upgrade file” onto SD card.
3. Turn
the main power switch on the rear panel to the OFF position. Insert the SD card into the
SD
card slot in the front panel then turn the main power switch on the rear panel to the ON
position.
4. The
upgrade starts automatically once the “upgrade file” on SD card is detected.
1) Once the upgrade file is detected on the SD card you will see the
following display.
1) Once the upgrade file is detected on the SD card you will see the
following
display.
2) If there is any problem with the SD card, you will see the following
message. Check that the fiel has been downloaded correctly to the
SD card.
2) If there is any problem with the SD card, you will see the following
message.
Check that the fiel has been downloaded correctly to the
SD
card.
3) In phase one of the upgrade the current memory is deleted, a
progress bar will be displayed.
3) In phase one of the upgrade the current memory is deleted, a
progress
bar will be displayed.
4) In phase 2 of the upgrade the new firmware will be loaded, a
progress bar will be displayed.
4) In phase 2 of the upgrade the new firmware will be loaded, a
progress
bar will be displayed.
5) Once you have successfully completed the new firmware upgrade we suggest you delete the
upgrade file on the SD card before using it with this Receiver to record or playback music files.
5) Once you have successfully completed the new firmware upgrade we suggest you delete the
upgrade
file on the SD card before using it with this Receiver to record or playback music files.
FUNCTIONS