USER’S MANUAL DAB/DAB+ Receiver DG-DAB888R MUTE INT. PRO. HD MEMORY SEARCH OSD SETUP FILE MOVIE CVBS MUSIC PHOTO MENU OK 16:9 P+M VOL+ VOL- ZOOM ROTATE THE FUTURE OF HOME ENTERTAINMENT A clever .
NEED HELP? If you are experiencing difficulty operating this product or require set upassistance please contact the DGTEC Service Centre. The call is freefrom anywhere in Australia. Our operators will assist you in plainEnglish without the technical jargon: Call 1800 189 941 (Australia) 8:00 am - 6:00 Australian EST *Subject tochange without notice.
Precautions Before fore using this product, please carefully read and keep these Operation Instructions for later reference. Setting Up Ensure that the mains supply in your house complies with that indicated on the identification sticker located at the back of your Receiver. Install your Receiver horizontally, on a suitable base (furniture), with enough space around it for ventilation (7~10cm). Do not stack other, or heavy devices on top of the Receiver.
Precautions Handling the Power Cord - Hold the plug when you unplug the power cord. Do not put the power cord near any heat source equipment. Do not place any heavy object on the power cord. Do not use any other power that is not include the receiver(DG-DAB888R). Caution - Take care not to damage LCD. - Do not insert anything except SD Card into SD Card Slot.
Before you start Accessories Receiver (DG-DAB888R) Remote Control FM Radio Antenna Antenna Conversion Cable DAB+ Antenna A/V Cable AC/DC Adaptor Manual Install Battery In The Remote Control Remote Controller Function Buttons 1. Open the battery cover on the back of the remote control. 2. Insert batteries. Make sure that the polarities (+ and -) are aligned correctly. 3. Replace the battery cover. Remote If remoteController control does Function not operate Buttons properly 1.
Table of Contents Description - Front Panel ............................................................................................................................... 6 Description - Rear Panel ................................................................................................................................ 7 Tour of Remote Control ..................................................................................................................................
Description - Front Pannel Front Panel Controls 1. STANDBY When the unit is first plugged in, the indicator lights and LCD is turned on. When STANDBY is pressed on again, the light goes out and the receiver is turned off. 2. UP Use to move up or select a previous PRESET frequency. 3. LEFT Use to move left or go to previous menu. 4. DOWN Use to move down or select a next PRESET frequency. 5. RIGHT Use to move right or go to next menu. 6. DAB+ Go to DAB+ mode. 7. FM Go to FM radio mode. 8.
Description - Rear Pannel Rear Panel Controls 1. DAB+ ANTENNA INPUT JACK Connect to an external DAB+ antenna. 2. FM ANTENNA INPUT JACK Connect to an external FM radio antenna. 3. VIDEO OUT JACK Use a video cable to connect to the Video input jack on your television, amplifier, or a/v system. 4. DIGITAL AUDIO OUTPUT JACK Use an optical digital cable to connect to a compatible Dolby Digital Receiver. 5.
Tour of the Remote Control VIDEO -8- SETUP DG-DAB888R
Tour of the Remote Control 1. POWER button 16. MOVE DOWN button 2. VIDEO button 17. MOVE RIGHT button 3. SEARCH button 18. SELECT button 4. MENU button 19. FM RADIO button 5. ALARM1 ON/OFF button 20. MOVE UP button 6. DAB button 21. ALARM2 ON/OFF button 7. MOVE LEFT button 22. EPG button 8. REC PLAY button 23. BROWSER button 9. TIME button 24. EXIT button 10. ALARM1 button 25. REC. button 11. ALARM2 button 26. STOP button 12. VOL- button 27. CAPTION button 13. DATE button 28.
Connections Before the DG-DAB888R RemoteConnecting Controller Function Buttons - Always turn off the DG-DAB888R, TV, A/V system, and other components before you connect or disconnect any cables. - Refer to the user’s manual of the additional components you are connecting for more information on those particular components.
Connections Connection to anFunction Audio System Remote Controller Buttons CONNECTIONS Connect the audio / video cable Remote Connection Controller to a DAB+ Function antenna Buttons Connect the DAB+ antenna - 11 -
Connections Remote Connection Controller to a FM Function radio antenna Buttons CONNECTIONS Connect the FM radio antenna - 12 -
Power ON/OFF Power ON There are two kinds power on. - Main power on and STANDBY mode. 1. Main Power ON (1) Connect the AC/DC power adaptor into the power jack. (2) Press the upper side of the main power switch. (1) Press the power button on either the front panel or remote control. (2) A blue light will illuminate the circular directional button. - 13 - FUNCTIONS 2.
Power ON/OFF Power OFF There are two kinds of power off. - Main power off and STANDBY mode. 1. Main Power Off (1) Please press the low side of the main power switch. (1) Please press and hold the power button on product front panel or remote control. (2) Then the blue light will be turned off and the screen will display watch and date. - 14 - FUNCTIONS 2.
Using Buttons Front Panel Basic Function Keys Icon Key Action Items Power ON or Select file in browser mode. Long press Power OFF. (2) Short press Navigate up. (3) Short press Navigate left. (4) Short press Navigate down. (5) Short press Navigate right. (6) DAB Short press Go to Digital DAB+ mode. (7) FM Short press Go to FM radio mode. Short press Go to MUSIC playback mode. (8) MUSIC See the page7 and page8 for remote control usage.
Mode - Main Menu Main Menu Press button to display main menu. Use the one of the four selections available. and navigation keys to highlight FUNCTIONS DAB Menu Select DAB menu to activate Digital Radio (DAB+) mode. Press functions. button to display sub menu.
DAB Mode Return to Manu Press button to exit current mode(DAB mode - left side) or use the button on remote control to exit current mode. Searching Channels Searching channels with this icon. Press the channel search screen or use the control to activate channel search. button to display button on remote Searching Hold / Recording Stop Press the STOP icon to stop scanning in channel search mode or to stop recording in recording mode.
DAB Mode Recording Select REC icon or press button on remote control to record the channel you are listening to. REC symbol will be displayed during recording. Channel List Select this icon to display the channel list and press button to show the list in the format left below. EPG Select this icon or press button on remote control to display the selected channels EPG (Extended Program Guide) when available. Press or button to select the list and press button to display the channel information.
FM Radio Mode Press or button to select the list and press button to display the program information in detail. Press button to return previous menu. Press button to return previous menu. FM Radio Mode FM rdaio will be displayed as below. 1. Searching Frequency Press button to scan all frequencies. The scanned broadcasting frequencies will be automatically stored. Press or button to search the stored frequency.
MUSIC Playback Mode Browser will display DAB recording file only. Press , , or button to highlight the file that you want to playback. After highlighting the file, press , button to play. Use the or button on remote control to adjust volume, the volume bar will be displayed on screen. Press button on remote control to mute the volume. MUSIC Playback Mode Music Playback Screen 1. Level Meter : Color level meter. 2. Folder/file name and file information are displayed which scrolls automatically. 3.
Time and Alarm Setting 1. Time Setting button, the hour segment will flash. Press or button to set the hour. Press Next press button to set the minute segment of the time, the minute segment will flash. Press or button to adjust the minute setting then press button to save settings. 2. Date Setting Press button, then year segment will flash. Press or button to adjust the year. Next press button the month segment will flash. Press or button to adjust the month setting. Press button to move to date bar.
Firmware Upgrade New firmware, for this Receiver may become available at some point in the future to provide enhanced features for this product. Check our website from time to time. If/When a new firmware upgrade becomes available follow this procedure. 1. Download “upgrade file” from our web site (www.dgtec.com.au) 2. Copy “upgrade file” onto SD card. 3. Turn the main power switch on the rear panel to the OFF position.
Q&A (TROUBLESHOOTING) Before calling the DGTEC National Call Centre on 1800 189 941 trying using the Trouble Shooting Guide below. Q. No power. A. Make sure the AC/DC adaptor is properly inserted into the power socket on the rear panel of the Receiver. Check that the power switch on the rear panel of the Receiver is in the ON position. Q. Cannot get the DAB+ signal A. Check that the DAB+ antenna is properly connected with DAB+ antenna socket. Q. No sound / video A.
SPECIFICATION General Power Requirements AC/DC Adaptor 5.0V@1.0A Power Consumption max. 5W Dimension 410mm(W) x 250mm(D) x 55mm(H) Operating Temperature Range +5 C to +35 C Operating Humidity Range Memory External Memory Video Output Composite Video Display 2 channel Audio Output Frequency Response Music Play DAB+ Dimension Antenna 10% to 75% SD Card Type QVGA(320 x 240) TFT LCD 1 channel : 1.
A clever .
