Contents Introduction .................................................................................................1 Warnings and cautions ..................................................................................2 Main unit descriptions ...................................................................................5 Remote control hand unit ..............................................................................7 The OSD menus ........................................................
1 Introduction Thank you very much for your purchase of our Digital LCD TV . It serves as a Digital TV. To enjoy your set to the full from the very beginning, read this manual carefully and keep it handy for ready reference. 1. Installation ! ! ! ! ! ! Locate the receiver in the room where direct light does not strike the screen. Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
2 Warnings and cautions Warning High voltages are used in the operation of this product. Do not remove the back cover of the cabinet. Refer servicing to qualified service personnel. Warning To prevent fire or electrical shock hazard, do not expose the main unit to rain or moisture. Warning Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.
3 Warnings and cautions Minimum distances Caution If the television is to be built into a compartment or similarly enclosed, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be dangerous. 10cm 20cm Caution Never stand on, lean on, push suddenly the product or its stand. You should pay special attention to children. Caution Do not place the main unit on an unstable cart stand, shelf or table.
4 Warnings and cautions Caution When the product is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet. Caution Avoid exposing the main unit to direct sunlight and other source of the heat. Do not stand the television receiver directly on other product which give off heat. E. g. video cassette players, audio amplifiers. Do not block the ventilation holes in the back cover. Ventilation is essential to prevent failure of electrical component.
5 Main unit descriptions Control location 1.Power button 2.TV/AV button (TV/AV) 3.Menu button (MENU) 4.Volume down button ( V -) 5.Volume up button ( V + ) 8 9 1 6.Program down button ( P- ) 7.Program up button ( P+ ) 8.Power indicator 9.
6 Main unit descriptions Caution 1.VIDEO,S-VIDEO share audio input R1,L1. 2.VIDEO,S-VIDEO can not be inserted together. DVB-T COMMON INTERFACE 3.VGA, YPbPr share audio input R2,L2. 4.YPbPr can also accepts signal of YCbCr format. 5.DVB function for LTV-3203HT model only, LTV-3203H is without DVB-T ANTENNA. 6.DVB-T Antenna can receive digital video broadcast signal. 7.Do not switch the Main Switch to on until the light of the Power Indicator disappears.
7 Remote control hand unit 1.[Power] or : Turn the display on/off. 2.[V-/V+],[ / ]: Press [V+] to increase volume. Press [V-]to decrease volume.[V+] also can cancel the Mute mode, reference [MUTE] key.[V/V+] are also used as arrow keys when operating in the menu . [V+] function as [ ] ,[V-] function as [ ]. 3. [P-/P+],[ / ]: Press [P+] to turn to next program, press [P-] to turn to previous program. A program number can be skipped if the skip mark is turned on for this program in the installation menu.
8 Remote control hand unit Mute 1 04:20:10 User Personal INCR MONO SLEEP 80 5.[MUTE]: Press this key, the sound is cut; Press key again or [ ] key, mute is cancelled. 6.[CALL]: Display the following information: (1) The current program number or signal source. (2) The picture mode (3) The sound effects mode (4) The mode of sleep (5) The stereo mode 7. [0]-[9]:Digit keys is used to directly call a TV channel by program number. The valid number are from 0 to99.
9 Remote control hand unit 10. [ZOOM]: Switch the size of the picture in the sequence as following ZOOM FULL 4:3 SUBTITLE ZOOM ZOOM FULL 4:3 SUBTITLE In YPbPr mode, this function only work for 480i ,576i input. 11. [|/||]:For the signal from antenna,change A2\NICAM mode A2 mode: MONO STEREO MONO A2 bilingualism mode I MONO NICAM mode: MONO STEREO MONO NICAM bilingualism mode: MONO DUAL DUAL MONO For video inputs: I Select left channel Select right channel The default mode is always stereo.
10 Remote control hand unit 04:28:18 12. |P| : By repeatedly pressing this key, picture effects will change as follows: USER STANDARD MOIVE VIVID USER 13. |S| : By repeatedly pressing this key, sound effects will change as follows: PERSONAL VOICE MUSIC THEATER 14. [Time]: Call time out. This televison automatically obtain time from transmitted teletext information in program 0. If teletext is not available in this region, the time still can be set in RTC item in feature menu.
11 Remote control hand unit 17 . [TV MENU]: Call the main menu out, or quit to previous menu. 18. [SUBTITLE]:This is a multiplexed key of subtitle and subcode. Directly press this key in TV mode , the key functions is subtitle, which calls out the subtitle page. If already entered text mode via [TEXT] key, this key functions is subcode . Subcode pages are subsections of long teletext pages that can only be displayed on the screen one section at a time.
12 Remote control hand unit 24. [REVEAL]: Open or close some hidden information of the current text page. 25.[DVB MENU]: Press [DVB MENU] can select the DVB source. In the DVB source, press [DVB MENU] to call the DVB main menu out or close the DVB menu.
13 The OSD menus OSD main menu is called out by first time pressing menu key. The main menu contains 3 parts: a icon column, a menu title and a menu item box. At first time the menu is called out, the upper icon pops out and the menu title indicates as picture menu. icon column Using [P+/P-] key browse through five menus: ! ! ! ! ! menu title Picture menu Sound menu Feature menu Installation menu Edit menu Each menu can be entered by pressing [V+/V-] key.
14 The OSD menus A.In the state of that the input source is TV, VIDEO, S-VIDEO YPbPr SCART DVB 1.The picture menu a.The following picture is the sketch map of the picture menu. b. The definition of each option: 1.Brightness: Change the value of brightness with the key in the rang of 0 to 100. 2.Contrast: Change the value of contrast with the key in the rang of 0 to 100. 3.Color: Change the value of color with the key in the rang of 0 to 100. 4.
15 The OSD menus 2. The sound menu a. The following picture is the sketch map of the sound menu. b. The definition of each option: 1.Volume: Change the value of volume with the key in the rang of 0 to 100. 2.Balance: Change the value of balance with the key from -50 to 50,usually 0 is recommended. 3.Bass: Change the value of bass with the key in the rang of 0 to 100. 4.Treble: Change the value of treble with the key in the rang of 0 to 100. 5.Set the function of AVL on or off by using the key .
16 The OSD menus 9.The advance option including: (1). DUB.DBE: Select a bass enhancement mode from DUB, DBE or BBE and also could cancel the function of bass enhancement. * Some models do not have choice of BBE. (2) HP volume: Change the value of head phone volume with the key in the rang of 0 to 100. (3) HP balance: Change the value of head phone balance with the key in the rang of -50 to 50. (4). EQUALIZER: enter equalizer submenu.
17 The OSD menus 3. The feature menu a. The following picture is the sketch map of the feature menu. b. The definition of each option: 1.Source OSD: Set the function of source OSD on or off. If set to on, source is always indicated on the left top. 2.Language: Select the language of the OSD menu from English French, German, Italian, Spanish and Russian. 3.Child lock: In order to avoid children to watch the program which is not suitable,a children lock could be set.
18 The OSD menus 4.Timer: Some options about auto shut down could be set in this item. Including sleep timer on or off, shut down time, power on time and the power on program. On/off timer could be set by directly pressing digit keys or canceled by pressing -/--. While RTC is set to mode AM/PM, could be used to change on/off timer between AM and PM. On/off timer only take effect when the RTC is set to on in Real Time Clock submenu. 5.TXT Language: The Teletext language could be selected in this item.
19 The OSD menus 8.PIC MISC:Advanced picture settings which respectively improve picture quality. Settings in this menu may take significant effects only for some particular picture. Sometimes dis-professinal user can not find difference to toggle functions on off. To switch on LTI(luminance transient improvement) usually makes picture a little bit sharper, while CTI(chrominance transient improvement) clarify edge of coloured area.
20 The OSD menus 4. The installation menu a. The following picture is the sketch map of the installation menu. b. The definition of each option: 1.Program NR: switch the program by the sequence of program number increase or Decrease by using the key . 2.Color system: select the color system from Pal-443, SECAM, UNKNOWN, AUTO and NTSC-443 by using the key . 3.Sound System: select the sound system from AUTO, BG, I, DK L and BG NICAM by using the key . 4.
21 The OSD menus 7.Skip: When it is ON, the current program would be skipped while changing channel with [P+/P-] keys; but it still could be achieved through digit keys. A skipped program number displays in red. You can set those weak signals or certain programs not likely to watch to skip on. 8.Lock: Only when the lock is on , the children lock is available. 5. The edit menu a. The following picture is the sketch map of the edit menu. b.The definition of each option: 1.
22 The OSD menus B.In the state of that the input source is VGA, HDMI NO SYNC 1.Display NO SYNC in the middle screen without signal input. The blue light glitters. [TV menu]and number key is unavailable. Switch to other source by [TV/AV],[V-/V+],[QV]. System goes to standby after 15 minutes of no signal waiting. 2.Only PICTURE SOUND and FEATURE menu can work when there's signal input. When using other signal the PICTURE menu is different as below. Description: 1.
23 The DVB OSD menus DVB First Time Installation A For the first time installation: 1.When entering DVBT source for the first time system will run this installation guide. Firstly, system will guide users to start automatic search. Do you want to start automatic search? Yes No Automatic search Rowridge: BBC ONE Rowridge: BBC TWO Rowridge: BBC THREE 2.Choose [Yes] and press [OK] to enter the auto search page as the following sketch map shows.
24 The DVB OSD menus Main Menu DVB OSD MENUS Channel List Favourites Press [DVB MENU] to enter the main menu page as the following sketch map shows: Guides Settings Common Interface Choose the Channel List menu and press [SELECT] to enter the next level menu in which lists all the channels that have been searched. The current program will be played in the right window while the name of it is displayed below.
25 The DVB OSD menus Select the Favourites menu in the main menu and press [SELECT] to enter the menu page. Use [ ] to select channels, and [ ] to select List. Press [SELECT] to enter or delete the selected channel into or out of the selected List.
26 The DVB OSD menus Now/Next EPG Wednesday 30/10 14:13 Channels Current Event Next Even t 1.BBC ONE 2.BBC TWO 7. BBC THREE 30. CBBC 40.BBC NEWS 24 51.BBCi Doctors Tall in the Saddle This is BBC CHOICE Julia Jekyll And Harrie t H BBC News BBCi Quincy Westminster Live Welcome to BBC CHOICE Stitch Up BBC news BBCi Navigate Schedule List Schedule EPG SELECT Watch Event Select Now/Next EPG option and press [SELECT] to enter the next level submenu, as the following sketch map shows.
27 The DVB OSD menus In Guides menu, select Timeline Schedule EPG option and press [SELECT] to enter the next level submenu as the following sketch map shows. Use [ ] and [ ] to see the program parade. Timeline Schedule EPG Wednesday 30/10 14:45 15:30 1. BBC ONE 2.Eins Extra 7. BBC THREE 30.CBBC 40. BBC NEWS 24 51.BBCi Navigate In main menu, select Settings option and press [SELECT] to enter Settings menu page, as the following sketch map shows.
28 The DVB OSD menus In Settings menu, select Configuration option and press [SELECT] to enter configuration menu as the following sketch map shows. DST: Set DST(daylight saving time) on/off. Subtitles: Open and close the subtitle. Banner: set the banner display time except you press [i]. Favorite mode: close favorite mode or select the favorite list. Channel list: select the program range.
29 The DVB OSD menus In Settings menu, select Installation option and press [SELECT] to enter the Installation menu, as the following sketch map shows. Automatic Search sub menu and First Time Installation sub menu have been introduced above. In Installation menu, select Manual Search option and press [SELECT] to enter the Manual Search menu, as the following sketch map shows. Use [0]-[9] to input the channel number and press [SELECT] to confirm.
30 Television installation Connect antenna or video facility 1.Use 75 coaxial cable plug or 300-75 impedance converter to plug in antenna input terminal on the rear of the cabinet. 2.Connect the video facility to the audio, video in jack on the rear of the cabinet.
31 Battery installation & replacement for remote control unit The remote control uses two 1.5V AA batteries. For battery installation and replacement are as following: 1. Turn the remote control unit upside down. Press down the grip of battery compartment and slide the color in the direction of the arrow. 2. Install two new batteries, make sure that battery polarity matches with the marks inside the battery. Or not it could damage the unit. 3. Close the battery compartment covers.
32 Troubleshooting Before arranging for service, firstly know the status and then check simply as follows: Problems No picture or sound. Picture is OK, no sound. Check Check if the power supply is plugged in and the power switch is on. Check if the volume control is set to the minimum or mute. Remote control does not work. Check if the batteries are out of use or not connected well.
33 Specifications
34 Specifications Note: All specifications are subject to change without notice. Different country marketed item, it is the few function with use manual content maybe is differential. All quality and size are approximate value.
