LTV-2291WHC
CONTENTS English ........................................................ 1 ~ 51 Français ......................................................... 1 ~ 51 Deutsh .........................................................
English CONTENTS WARNINGS AND PRECAUTIONS Important Safety Instructions...................................................................... EN1 Antenna Safety Instructions........................................................................ EN3 INTRODUCING THE LCD TV Package Contents ................................................................................................... EN4 Setting Your LCD TV ................................................................................
WARNINGS AND PRECAUTIONS Warnings and Precautions To prevent any injuries, the following safety precautions shoul d be observed in the installation, use, servicing and maintenance of this equipment.Before operating t his equipment, please read this manual This symbol is intended to alert the user to avoid the risk of electric shock. This eq must not be disassembled by anyone except qualified service p ersonnel.
Warnings and Precautions ▪ Remove the plug from the wall outlet, if the equipment will not be used for a long period of time. ▪ Do not place, use or handle this equipment near water. ▪ Never expose the equipment to liquid, rain, or moisture. Seek for service if any o above is spilled into the equipment. ▪ Do not expose the equipment to extreme temperature or to direct sunlight, as the equipment may heat up and suffer damage.
This sign indicates that this product may not be disposed of with your regular household waste. The recycling and separate collection of such products is your responsibility. Please drop off the above-mentioned waste at a designated place for recycling waste electrical and electronic equipment.
Package Contents EJECT AUTO PROG INTRO REPEAT A-B AR148 LCD TV SET Warranty Card Warranty Book AC Adapter Power cord EN4
Setting Up Your LCD TV How to install the TV Stand Open the box, and make sure all necessary parts are in the box. The package contains: LCD TV Stand Cover an even stable surface with a soft cloth. Place the LCD TV unit face-down on the cloth. Fit the stand onto the bottom of the LCD TV unit as shown, then use a screw driver to tighten the screw on the bottom of the stand until the screw is firmly fixed in place.
How to setup the TV Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV’s ANT. terminal Connect the AC power cord at the back of the TV and connect the power cord to wall outlet. Insert the 2 batteries supplied in remote control. Step1 Slide the back cover up to open the battery compartment of the remote control. Step2 Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment.
Your LCD TV Front/left/Right Side View and Controls Right Side View Front View Left Side View PLAY/PAUSE EJECT EJECT PLAY/PAUSE LED The LED light indicates when the LCD TV is activated. IR Infrared Receiver SOURCE Chooses from different input signal sources. MENU Press once to display the OSD (on screen display), press again to turn the OSD off. CHA CH+/Scans up and down through channels. Selects submenu item when in the OSD mode. VOL+/Adjusts the volume up and down.
R L AUDIO IN COAX VIDEO OUT SCART DC 12V USB HDMI VGA PC AUDIO COMMON INTERFACE Y Pb Pr RF Reae View and Jacks DC 12V Input 12V DC power. Allows access to digital content stored on a USB storage. HDMI IN Connects the all digital AV equipment with HDMI connector. VGA/PC AUDIO Connects the PC, or other AV equipment with VGA and line in jacks. CI Insert the CI card into the slot SCART Connect to external equipment with scart socket.
How to connect CI(Common Interface) card CI SLOT To view the scrambled (pay) services in digital TV mode. TO INSERT A CI CARD Insert the CI card into the slot in the direction of the arrow until it fits. TO REMOVE A CI CARD When removing the CI card, do pull it from its slot. This function enables you to watch the scrambled services (payservices) in some channels. If you remove the CI Module, you can watch the available digital/analogue programme in some channels.
Your Remote Control STANDBY Turns the LCD TV on and into standby mode. EJECT AUTO AUTO/EJECT Press this key to AUTO config the picture setting while in VGA mode, or EJECT the disk in DVD mode. MUTE Mutes and restores your LCD TV sound. 0-9 Pressing a number selects a channel. C/L Press this button continuously to select Country and Language. Switches back and forth between the current and previous channels. ASPECT Cycles through Wide mode settings. AUDIO Audio selection button.
Your Remote Control TEXT Turns on and off the Teletext function. In Media mode, press to jump to the previous of the currently played chapter or track. HOLD Freeze a multi-page passage on screen in Teletext mode. In Media mode, press to jump to the next of the currently played chapter or track. TV/RADIO In DTV mode, press TV/RADIO button to enter DTV or RADIO mode. AUDIO Change the audio language of current service if available. SUBTITLE Open or close subtitle.
Installing the LCD TV Refer to the owner’s manual of any external equipment to be connected.When connecting any external equipment, do not connect any AC power cords to wall outlets until all other connections are completed. Connecting a TV Cable or an Antenna Antenna Connection The antenna requirements for good color TV. Use one of the following two diagrams when connecting an outdoor antenna. A: Shows how to use a VHF/UHF combination outdoor antenna.
Installing the LCD TV Use a supplied antenna cable to connect the TV signal to the LCD TV ’s TV CABLE terminal. Connect the AC power cord at the back of the TV and connect the power cord to wall outlet. DC 12V Press the button on the remote to turn on the LCD TV. C C C Press the SOURCE button on the remote to display the Source List. Use the ▲▼ buttons to select DTV source, and press the ENTER button.
Using the Features 1. Main Menu outlook and description Main Menu items（from right order CHANNEL –> PICTURE -> SOUND -> TIME -> OPTION -> LOCK ） at DTV/ATV input source，the first page showed is CHANNEL. At non DTV/ATV input source，the first page is PICTURE as default. Currently press ENTER to get in sub menu 1.1 CHANNEL: Programme edit Signal Information CI Information MENU Back Select OK EXIT Quit Note： 1) CHANNELcan be only selected under ATV/DTV condition，others can’t be used. 1.1.
Using the Features 2) operation declaration ： Press move to select up and down, press DONE to start scanning. When scanning, the first 50% processing means ATV tuning, the last 50% processing means DTV tuning. Data MENU Back EXIT Quit When ATV tuning, you can press exit to skip ATV tuning and start DTV tuning, as following: 1.1.
Using the Features 1.1.3 ATV manual tuning: EXIT Quit 1) function description: Item Adjust item Storage To 1 – 100 System BG -> I -> DK -> L Current CH 1 – 100 default 1 Description Current storage space shows Default option selection 1 depends on country Current channel shows Search Can be searched at full channel condition Fine-Tune Fine-tune Frequency When gray ， no selected Show the current frequency, and follow Search or Fine-Tune to adjust.
Using the Features 1.1.4 Programme Edit : ok Select MENU Back 1) format and description Encryption identity LCN CH Name S 21 ABC1 Skip identity Lock identity Fav identity Systerm 1. the Cannel menu includes“Delete/Move/Skip /Rename /Fav”. “ Lock、 Fav、Skip” can be used when clients do some settings to the channel. （Fav can not be fixed together with Skip).
Using the Features (move) ATV/DTV Channel switching function，ATV available as default, DTV available at non open LCN auto ordering condition. 1) at normal condition ，enter SWAP mode, and current sellected channel is mobile channel X. 2) at SWAP mode： MENU：exit SWAP mode，turn to normal condition EXIT：exit menu UP/DOWN：choose switching channels ：if current selected channle is what selected before X, no any other action; otherwise, the current channel is channle Y, need to exchange X and Y condition.
Using the Features 1.2 PICTURE Menu Back ok Select EXIT Quit 1.2.1 Picture Mode Menu Back EXIT Quit 1) Function instruction Item Picture Mode Adust range Standard -> Mild -> User -> Dynamic default description Standard Default：at non User mode, you can select Contrast、 Brightness 、 Color 、 Sharpness 、 Tint to do the adjustment, the mode turn to User automatically.
Using the Features 2) Operation instruction Adjust :LEFT,RIGHT to adjust numerics size； Menu :press MENU to return picture main menu； Exit :EXIT to exit menu； UP,DOWN: adjust content with up/down button: as Contrast / Brightness / Color / Sharpness； 1.2.3 Color Temperature Menu Back EXIT Quit 1) function instruction Item Color Temperature Adust range Standard-> Cool -> User -> Warm default description Standard At non User mode, you can select Red/Green/Blue options to amend the color.
Using the Features 1.2.5 Aspect Ratio 1) function instruction Panel resolusion 16:9 / 16:10 default 16:9 4:3 4:3 4:3 (physical demensions 16:9) 16:9 Input source No VGA mode 16:9 -> Zoom1 -> Zoom2 -> Auto -> 4:3 VGA 16:9 -> 4:3 No VGA 4:3 -> 16:9 -> Zoom1 -> Zoom2 -> Auto VGA 4:3 -> 16:9 No VGA 16:9 -> Zoom1 -> Zoom2 -> Auto -> 4:3 VGA 16:9 -> 4:3 Note：When panel resolusion is 4:3，demension is 16:9 and 4:3 mode， acturally theoutput resolusiuon is 1:1. 1.2.
Using the Features 1.3.1 Sound mode Menu Back EXIT Quit 1) Function instruction Items Sound Mode Adjust item Default description Standard -> Music -> Movie -> Sports -> User Standard At non User mode, Treble and Bass can’t be selected and adjusted 2) Operation instruction Adjust :LEFT,RIGHT adjustable：Standard -> Music -> Movie -> Sports -> User Menu :MENU to return picturemain menu Exit :EXIT to exit menu 1.3.
Using the Features 1.4 TIME Menu Back OK Select EXIT Quit 1.4.1 Clock Menu Back EXIT Quit 1) function instruction The default rate isn’t get the time information from DTV, but I can set it by hand when enter CLOCK menu. 2) Operation instruction Move :UP,DOWN Menu :MENU to back picture main menu Exit :EXIT LEFT,RIGHT button to set parameter 1.4.
Using the Features 1) function instruction Items Defa ult Adjust item description Repeat Off -> Once -> Everyday -> Mon~Fri -> Mon~Sat -> Sat~Sun -> Sun Off Hour 00 - 23 00 When Activate turns Off ， Gray, availble no Minute 00 - 59 00 When Activate turns Off ， Gray, availble no 2) Operation instruction Move :UP,DOWN Menu :MENU to back picture main menu Exit :EXIT LEFT,RIGHT button to set parameter 1.4.
Using the Features 2）Operation instruction Move :UP,DOWN Menu :MENU to back picture main menu Exit :EXIT LEFT,RIGHT button to set parameter 1.4.4 Sleep time 1) function instruction Items Sleep Timer Adjust item Off -> 10min -> 20min -> 30min -> 60min -> 90min -> 120min -> 180min -> 240min Defa ult Off description Reminding at last 60 seconds: Stop reminding when press it ， sleep setting turns Off 2) Operation instruction Enter second menu, use UP,DOWN to set sleep time. 1.4.
Using the Features 1.5 OPTION OSD Duration Menu Back OK 30S Select EXIT Quit 1.5.1 OSD Language 1) Function instruction Items OSD Language Defa ult Adjust item description Choose the default language according to shipping address and clients demand. Default language： english/french/germany/italian/portugal Supported language 2) Operation instruction Enter second menu, use UP,DOWN to set language 1.5.
Using the Features 1.5.4 Subtitle Language 1st 1) function instruction Items Subtitle Language 1st Adjust item Default First language selected description Not selected at non DTV condition 2) Operation instruction Enter second menu, use UP,DOWN to set language. 1.5.
Using the Features 1.6 LOCK Lock Channel Menu Back OK Select EXIT Quit 1.6.1 Lock System 1) Function instruction Items Lock System Adjust item Defa ult Off/On Off description Default password is 0000 2） Operation instruction LEFT to quit passport，turn back main menu RIGHT to delete password wrote and rewrite correct one. It need input correct password to enter the LOCK submenu. It shows wrong password when you put uncorrect password.
Using the Features 1.6.2 Set Password 1) Function instruction Items Adjust item Defa ult description Enter the submenu, insert new password and confirm it Set Password 2）Operation instruction LEFT to exit reset password, back to main menu RIGHT to cancle the written password, and then rewrite it. If the password get wrong twice, it shows “password doesn’t match”. 1.6.3 Block Program 1) Format and description Encrypt sign LCN CH Name S 21 ABC1 Lock sign systerm Note ： .
Using the Features 2. Other menu 2.1 Channel List Channel List shows all searched channel. Move OK Select EXIT Quit 1) format and description Encryption sign LCN CH Name S 21 ABC1 Skip sign Lock sign Fav sign systerm Note：1. Lock、Fav、Skip sign can be only used when channles do any audits.
Using the Features 2.3 EPG EPG is only available in DTV，channel information classfied by CHANNLE /TIME. Can choose up and down：Channel /Time OK Select EXIT Quit All programme information, if classified by time, it shows all programme informationa at currently time. Details information of selected programme. 1）operation notes Move: move up and down Menu：exit EPG OK: switch to current selected programme Index: switch to type option Record: record programme.
Using the Features 2.4 Installation Guide Please set the following options, then OK Select EXIT Quit 1） Function and instruction： If not stored channel information, power on and turn to DTV/ATV condition，it shows Installation Guide menu.
Using the Features 3. Multimedia 3.1 Brief introduction At Input Source menu, choose USB source to enter Multimedia condition. At Multimedia condition，the systerm can do the files clariufy, order, playing operation and other Browser work besides multimedia playing. 3.
Using the Features 3.
Using the Features 3）Operation instruction When choose picture, it shows picture preview frame and details, then press ENTER to enter full screem picture playing. When after picture full playing, press ENTER to show the following operation button. In Out 4) Button instruction Button Function Info/Display Show current picture preview, the information is showed as follows: Blue Hills.
Using the Features 3.4 MUSIC submenu pattern, equip and button introduction. 1) Multimedia MUSIC submenu pattern. When selected songs in the list, press ENTER to show the songs preview, as follows： page preview disc Delete Current File Add/Remove all OK Full screen Menu Menu EXIT Songs list Files information 2) MUSIC submenu equip description equip Disc Add/Remove to playlist Quit descrip Show selected euqip disc Page Show pages songs list Show song lists.
Using the Features 3) MUSIC playing conditon and keys function MUSIC playing is the menu just like playing software in PC, mainly have playlist, basic information, processing sign, operation guide part, as follows: Songs information Songs name Songs list Screen Saver 1/1 Remove Remove all from playlist Goto Time Operation guide MUSIC image progress bar Play time 4) MUSIC playing equip function Equip Descrip Songs name Current songs name MUSIC image One image used to sign MUSIC Songs list So
Using the Features 3.5 MOVIE playing condition and button function 1) Playing condition 1. MOVIE is playing at full screen for all marked files when clients browsing，from the top files folder to order with letters. 2. MOVIE’ s zooming requires: Zooming it at most in the current size to preserve the original size.
Using the Features 3.6 TEXT Delete Current File Add/Remove all OK Full screen Menu Menu EXIT Add/Remove to playlist Quit Choose TEXT files, press ENTER and it shows the above frame. Press play to star full screem playing as follows: Operation ： Prev page: previous page Next page: next page Prev.
Using the Features 4. Personal Video Recorder(PVR) 4.1 Brief PVR funcition is only available for DTV, includes Record, Timeshift and Playback function. Recording includes in time record and preserve record. In-time record can be worked through short-cut button immediately, and preserve record need to preserve before. Record and Playback can be done of the same time, that means record DTV and playing USB equip at the same time.Timeshift is another function for both record and playing together.
Using the Features 4.2.1.1 Select Disk Choose the disc to store whatever content need record, as follows, default as C: Move OK Select 4.2.1.2 Check PVR File System Check storage equipment PVR File System is well established. Default as Start, press Enter button to inspect the USB files systerm and speed, the processiong shows Checking…. When no inserting USB, or inspection failed, it shows FAIL. When inserting USB but didn’t pass MStar Format, enter Format menu.
Using the Features 4.2.1.4 Time shift size When finish Creating PVR file system, it pop out Time Shift Size setting menu, and clients can set the space size for time shift as follows: OK Select MENU Back 4.2.
Using the Features 2) Menu instruction Items Notes Title Recorded List Ordering Show in title right, means the current ordering way, List/Index button can switch option：Program -> Channel -> Time, which make orders by programme name, channel order and record time. Show current condition, recoreded programme shows no mark, if shows Mark PLAY and , it means recording, and if it shows PLAY and , it means on the playing, if Focused, it shows color image, otherwise it is gray.
Using the Features 4.2.3 PVR – Record Mode 1) Recorded mode Month 2010/07/20 Jan Date 2010/07/20 Date Jan Month Move Item OK Select MENU format Back notes Menu title Recorder Mode Menu topic Title 655335 When choose Auto, get current programme to set recording, Title shows its current name.
Using the Features 4.2.4 PVR – Recorder Schedule 1) Menu and function Move Delete Back MENU EXIT Quit Note： 1.Iterms in the blank start time ordering according to record plans If enter the menu to add new plans, focus to new plans. 2.It enter the menu when recording, focus on current recording plans. 3.Besides 1 and 2 condition, focus to the latest non-start plans.
Using the Features 4.3.2 Record 1）Record Record menu includes two kind: one is Full Mode，the other is Simple Mode. They can switch by Record/Exit button. At Record mode, Record menu shows still. The details is as follows: 一. Full Mode Note1) Note4) Note3) Note2) Note： 1. Record 2. recorded time 3. the left row is channel name and the right row is programme name 4. current time 二． Simple Mode [00:00:20] Note：At Simple Mode, it only shows Record and record time on the left bottom side.
Using the Features 4.3.3 Timeshift 4.3.3.1 Timeshift menu Timeshift is similar with Record menu, includes two kind: one is Full Mode and the other is Simple Mode. They can switch by Exit button. At Timeshift mode, Timeshift keeps still. As follows shows: Full Mode： Note3) Note1 Note4) Note2 Note5) Note： 1）Shows the current operation, such as Play、Pause、Fast Forward、 Fast Rewind、Next、Prev. 2）A->B circle signs, when mark A or B, highlight showings, which only show at play condition.
Using the Features 4.3.3.2 Timeshift conditon 4.3.3.2.1 Timeshift Start conditon Enter Timeshift to press Pause, and the image paused and it start record from the paused position. It shows Timeshift Start condition, as follows： Button Function Play Enter Timeshift Play condition Stop Stop Timeshift Exit Switch Timeshift menu mode List Close Timeshift, pop out Recorded List From Recorded List menu to enter Playback, and then exit Timeshift Exit Recorded List first and then show menu Timeshift 4.
Using the Features 4.3.4 Playback 4.3.4.1 Playback Playback is similar with Timeshift, one is Full Mode, and the other is Simple Mode. They can be switch by Exit button. At Playback mode，Playback shows still. Menu mode as following shows: Full Mode： Note2) Note1 Note6) Note3) Note7) Note4) Note5) Note： 1) Shows the current playing condition, shows as different operation such as: Play、 Pause、Fast Forward、Fast Rewind、Next、Prev.
TROUBLESHOOTING TV will not turn on Make sure the power cord is plugged in, then press the POWER button on the remote The batteries in the remote control may be exhausted Replace the batteries. No picture, no sound Check the interface cable between TV and antenna. Press the POWER button on the remote. Press the SOURCE button on the remote repeatedly to select the connected video sources. Poor picture, sound OK Check the interface cable between TV and antenna.
Specifications SPECIFICATIONS Items Relevant illustration Panel 22”Wide Screen LCD Resolution 1920 x 1080 pixels Features Input interface Compatible areas Multiform TV standard DTV standard PAL DVB-T PC D-sub 15pin input interface CVBS, YPbPr,HDMI Composite video input interface, YPbPr input interface RF 75Ω aerial interface SCART Standard Full SCART interface Audio Left, right audio input interface USB USB devices input interface HDMI input interface Headphone Output Headphone ou
