Users Manual

ManualsBrandsDGL Group ManualsPhone accessoriesGiant Novelty Earbud Speaker

Giant Novelty Earbud Speaker User Manual

NOR-XLB-WHT

Thank you for choosing our wireless audio player, please read the entire contents of this user manual before

operation. It is filled with reference information that will allow you to make the fullest use of the product. We

appreciate your kind understanding if there is any misprint or translation error.

Function Introduction

·Wireless audio: Stereo sound with MAX 10m liner receiving range.

·Wireless communication: Provide clear sound by using high fidelity wireless chip, no echo or tiny voice occurred.

·TF function: Power-off memory and loop playback function.

·USB function: Power-off memory and loop playback function.

. USB output voltage: DC 5V/1A.

. Aux-in: Easy to connect with laptop, mobile phone and other device with a 3.5mm audio cable.

. TWS (True wireless) function: Player A and player B could play same music source under Bluetooth mode.

In the box:

·1X audio player

·1X charging cable

·1X user manual

Controls & Functions:

1. Power/mode button

2. Previous song/volume down

3. Play/pause

4. Next song/volume up

5. Charging port/AUX-IN port

6. TF card slot

7. Mic

8. USB port

Power on & power off operating instruction

Power on: Press the power button for 2-3 seconds and then the speaker will be in paring model after voice

prompt.

Power off: Just press the power button for 2-3 seconds no matter which mode the speaker is staying, it will be

power off accordingly.

Summary of content (4 pages)

PAGE 1
Giant Novelty Earbud Speaker User Manual NOR-XLB-WHT Thank you for choosing our wireless audio player, please read the entire contents of this user manual before operation. It is filled with reference information that will allow you to make the fullest use of the product. We appreciate your kind understanding if there is any misprint or translation error. Function Introduction ·Wireless audio: Stereo sound with MAX 10m liner receiving range.
PAGE 2
Automatically shut down at low voltage: Please charging the speaker as soon as possible if the product working abnormally or power off at low voltage. Wireless function introduction: Searching the Bluetooth pairing name “MK-101” on your cell phone after speaker power on, then click “MK-101” and the Bluetooth device will automatically match successfully after a few seconds, the password is “0000” if necessary. The speaker will automatically connect the device which it connected at the last time.
PAGE 3
TWS Operation Attention：Please make sure that the 2 speakers both NOT connecting with any mobile device before doing TWS operation. . Suppose A is host player，B is slave player，power on A and B one by one，Double click the power/mode button of A，you will hear a “Ding-dong” prompt voice after 3-5 seconds when B connected with A successfully.
PAGE 4
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.