User manual

CQuick CStart

2 Quick Start

CAUTION— Torque Limit

Be careful not to exceed the platform’s maximum torque

specifications of 1.5 Nm (1.1 ft-lb). Special attention is

necessary when tightening or loosening the attachment

screws. Permanent damage to the device will otherwise

result.

Set up the controller following the instructions in the controller

manual. If you are going to connect a host computer to the

controller for computer-controlled operation, install the host

software in the host computer. That procedure is described in

the controller and or software manual or manuals.

Connect the rotary stage to the controller. With multi-axis

controllers, be sure to note the axis designation of the

connection selected.

Command a few test moves to make sure everything is working

properly. If your controller comes with graphic-user-interface

software, use it for such testing.