Specifications

The D2000 series is an enhancement of the D1000 series. As shipped from
the factory, the D2000 modules operate in the same manner as their D1000
counterparts. For example, a D2111 shipped from the factory contains the
same transfer function as a D1111 module; in this case they are both ±100
mV inputs and communicate with RS-232C.
Before any attempt is made to program a D2000, you must first be
familiar with the operation of a D1000 module as described in this
manual. That is why you received both the D1000 manual and the
D2000 programming manual with your purchase of the D2000. Please
refer to Chapter 1 "Getting Started" of this manual.
The D2000 series hardware is similar to the D1000 series in every respect
except that the D2000 contains built-in commands to create custom input-
to-output transfer functions. All programming is performed through the
communications port of the D2000 module. There is never any need to open
the module case. Modules may be re-ranged remotely as many times as
desired. Function data is stored in nonvolatile memory to retain the scaling
even if power is removed.
Appendix E
D2000 Series