User Manual

User Manual-4.0
Page 21 of 39
 First option is ‘Exit’. From exit option you can decide the exit point of the effect i.e. whether this effect should exit
with the previous effect or after the previous effect. There are two options given in the ‘Exit’ option. First is ‘After
Previous’ in which the selected effect will take place after the previous effect is played. Second available option is
‘With Previous’ in which the effect is played while the previous effect is being played.
 Next option available is ‘Hold’. This option helps you to define the holding period of the object on the page
 Next option given is ‘Duration’. Through ‘Duration’ option, you can define the duration of the effect on the object.
 There are various ready effects given in the software. You just need to select the object and click on the effect to see
the preview of the effect on the object.
 Once you click on any effect, it will be applied on the object.
 There are various sub- options available for various kinds of effects.
 First type of effect is ‘Mask’. In this option, you can find various masking effects for the exit of the selected object. You
can click on the effect to apply it to the selected object.
 In ‘Mask’ tab, you find an additional option of ‘Invert’. If you select this option, the masking effect you apply will be
inverted and applied on the selected object.
 Second tab in effects is ‘Zoom’. You can give zooming effect to the selected object from this tab.
 Two options are available in this tab. One is ‘Shrink’ in which the objects shrinks and disappears from the page.
 Second is ‘Grow’ in which the selected object grows up and disappears from the page.
 Next effects option is ‘Move’. In this option various arrows are given and the selected object exits towards the
direction shown in the arrow which you choose. There are various directive arrows given in this tab like top left, top
centre, top right, etc.
 Choose the desired one and see the immediate preview.
 The last effects tab is ‘Fade’. If you give the ‘Fade’ effect to the object on the page, the object slowly faints and
disappears from the page.
 Apart from several effects, you can also manage the opacity of the objects. To give opacity effect to the selected
object, check the opacity checkbox and then give effect.
 You can manage the rotation of the object from the rotation tab. You can rotate the object in three perspectives i.e. X,
Y and Z.
 You can rotate objects in clockwise or anticlockwise order.
 If you do not want to give any effect to any object then select the object and click on ‘Clear’ button available on the
bottom side of ‘Animation’ tab.
 When you apply any ‘Exit’ effect on any object, an orange box with an arrow in it appears on that object. It indicates
that this object has an exit effect.
 To go to the selected effect, click on the orange box and you will be able to see the selected effect in the ‘Animation’
tab.
Note: If no object is selected and any effect is applied by you, then that effect will be applied on background of the page.