Data Sheet
• Support UART(TTL) to wireless applications
• Drag down the level of the Reload IO pin for one sencod,you can restore factory settings.So do
not worry about the wrong settings.
• Support running in AP mode and the node (Station) mode;The real hardware AP, so Android can
directly access it.
• Provide AT command configuration
• Provide the friendly web configuration page,and can be configured by webpage
• Serial frame delay and the amount of data can be set.
• Support routing/bridge mode network architecture
• Designed by standard Arduino stack, and can be easily put on the standard Arduino, MEGA,
Romeo board or shield
Specifications
• Working voltage: 5V
• Frequency range: 2.4 - 2.497GHz
• Output power: 16dBm
• Transmission rate: 54Mbps - 1Mbps
• Transmission distance: <400M
• Size: 55mm x 53mm x 11mm
• Weight: 50g