Datasheet
V
DD
to GND .........................................................-0.3V to +2.2V
GND to PGND ......................................................-0.3V to +0.3V
V
LED+
to PGND....................................................-0.3V to +6.0V
All Other Pins to GND ..........................................-0.3V to +6.0V
Output Short-Circuit Current Duration ....................... Continuous
Continuous Input Current into Any Terminal ....................±20mA
ESD, Human Body Model (HBM) ....................................... 2.5kV
Latchup Immunity ...........................................................±250mA
Continuous Power Dissipation (T
A
= +70°C)
OESIP (derate 5.5mW/°C above +70°C) ....................440mW
Operating Temperature Range .......................... -40°C to +85°C
Junction Temperature ........................................................ +90°C
Soldering Temperature (reflow) ...................................... +260°C
Storage Temperature Range ............................ -40°C to +105°C
(V
DD
= 1.8V, V
LED+
= 5.0V, T
A
= -40°C to +85°C, unless otherwise noted. Typical values are at T
A
= +25°C) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
POWER SUPPLY
Power-Supply Voltage V
DD
Guaranteed by RED and IR count
tolerance
1.7 1.8 2.0 V
LED Supply Voltage
V
LED+
to PGND
V
LED+
Guaranteed by PSRR of LED driver 3.1 3.3 5.0 V
Supply Current I
DD
SpO
2
and HR mode, PW = 215µs,
50sps
600 1200
µA
IR only mode, PW = 215µS, 50sps 600 1200
Supply Current in Shutdown I
SHDN
T
A
= +25°C, MODE = 0x80 0.7 10 µA
www.maximintegrated.com
Maxim Integrated
│
2
MAX30102 High-Sensitivity Pulse Oximeter and
Heart-Rate Sensor for Wearable Health
Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer board.
For detailed information on package thermal considerations, refer to www.maximintegrated.com/thermal-tutorial.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only; functional operation of the device at these or any
other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device
reliability.
Absolute Maximum Ratings
Electrical Characteristics
For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that a “+”,
“#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing
pertains to the package regardless of RoHS status.
Package Information
PACKAGE TYPE: 14 OESIP
Package Code F143A5MK+1
Outline Number 21-1048
Land Pattern Number 90-0602
THERMAL RESISTANCE, FOUR-LAYER BOARD
Junction to Ambient (θ
JA
) 180°C/W
Junction to Case (θ
JC
) 150°C/W