Datasheet
Table Of Contents
- General Description
- Pin Assignments
- Absolute Maximum Ratings
- Electrical Characteristics
- Typical Operating Characteristics
- Detailed Description
- Register Description
- Application Information
- Package Information
- Tape & Reel Information
- Soldering & Storage Information
- Laser Eye Safety
- Ordering & Contact Information
- RoHS Compliant & ams Green Statement
- Copyrights & Disclaimer
- Document Status
- Revision Information
- Content Guide
Page 34 ams Datasheet
Document Feedback [v1-08] 2020-Jun-29
TMF8701 − Register Description
Figure 63:
STATE_DATA_9 Register
Figure 64:
STATE_DATA_10 Register
Reference hits and object hits are used for information purposes
of the target object and are only reported if a target is detected
with the distance algorithm.
Figure 65:
REFERENCE_HITS_0 Register
Figure 66:
REFERENCE_HITS_1 Register
0x31: STATE_DATA_9
Field Name Reset Type Description
7:0 state_data_9 0 RO Algorithm state data
0x32: STATE_DATA_10
Field Name Reset Type Description
7:0 state_data_10 0 RO Algorithm state data
0x33: REFERENCE_HITS_0
Field Name Reset Type Description
7:0 reference_hits[7:0] 0 RO
Sum of the reference SPADs hits during the
distance measurement; zero if no object is
detected or distance algorithm is no used
0x34: REFERENCE_HITS_1
Field Name Reset Type Description
7:0 reference_hits[15:8] 0 RO
Sum of the reference SPADs hits during the
distance measurement; zero if no object is
detected or distance algorithm is no used