Datasheet
Table Of Contents
- General Description
- Pin Assignments
- Absolute Maximum Ratings
- Electrical Characteristics
- Typical Operating Characteristics
- Detailed Description
- Register Description
- Application Information
- Package Information
- Tape & Reel Information
- Soldering & Storage Information
- Laser Eye Safety
- Ordering & Contact Information
- RoHS Compliant & ams Green Statement
- Copyrights & Disclaimer
- Document Status
- Revision Information
- Content Guide
Page 30 ams Datasheet
Document Feedback [v1-08] 2020-Jun-29
TMF8701 − Register Description
Figure 47:
RESULT_INFO Register
Figure 48:
DISTANCE_PEAK_0 Register
0x21: RESULT_INFO
Field Name Reset Type Description
5:0 reliability 0 RO Reliability of object - valid range 0 to 63 where 63 is best
7:6 measStatus 0 RO
When algImmediateInterrupt == 1
Will indicate the status of the measurement.
Value Definition
0
Proximity capture interrupted, using
previous proximity only result
1
Proximity capture interrupted, using
previous proximity and distance result
2
Distance capture interrupted, result is
from proximity algorithm only
3 Complete result (distance and proximity)
When algImmediateInterrupt == 0
Will indicate the status of the measurement.
Value Definition
0 Measurement was not interrupted
1Reserved
2
Measurement was interrupted (delay) by
GPIO interrupt
3Reserved
0x22: DISTANCE_PEAK_0
Field Name Reset Type Description
7:0 distance_peak[7:0] 0 RO
Distance to the peak in [mm] of the object,
least significant byte