Datasheet
Table Of Contents
- General Description
- Pin Assignments
- Absolute Maximum Ratings
- Electrical Characteristics
- Typical Operating Characteristics
- Detailed Description
- Register Description
- Application Information
- Package Information
- Tape & Reel Information
- Soldering & Storage Information
- Laser Eye Safety
- Ordering & Contact Information
- RoHS Compliant & ams Green Statement
- Copyrights & Disclaimer
- Document Status
- Revision Information
- Content Guide
ams Datasheet Page 3
[v1-08] 2020-Jun-29 Document Feedback
TMF8701 − Pin Assignments
Pin Diagram
Figure 3:
Pin Diagram TMF8701 Module
Pin Description
The GPIO is controlled by the firmware.
Figure 4:
Pin Description TMF8701 Module
Pin Diagram TMF8701 Module: Top
through view (not to scale)
Pin No. Pin Name Signal Type Description
1 VDDC Supply
Charge pump supply voltage (3V); add a
capacitor GRM155R70J104KA01 (0402 X7R
0.1μF 6.3V) to GND
2GNDC Ground
Charge pump ground; connect all ground
pins together
3GPIO0 I/O
General purpose input/output; default
output low; leave open if not used
4INT Output
Interrupt. Open-drain output; connect to
GND if not used
5 SCL Input I²C serial clock
Pin Assignments
VDDC
GNDC
GPIO0
INT
SCL
SDA
VDDV
GNDV
GPIO1
EN
GND
VDD
2
3
4
5
6
11
10
9
8
7
1
12