Datasheet

Datasheet
BMM150 Geomagnetic Sensor
Page 9
BST-BMM150-DS001-01 | Revision 1.0 | April 2013 Bosch Sensortec
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to
third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.
2. Absolute maximum ratings
The absolute maximum ratings are provided in Table 2. At or above these maximum ratings
operability is not given. The specification limits in Chapter 1 only apply under normal operating
conditions.
Table 2: Absolute maximum ratings
Parameter
Condition
Min
Max
Unit
Voltage at Supply Pin
V
DD
Pin
-0.3
4.0
V
V
DDIO
Pin
-0.3
4.0
V
Voltage at any Logic Pad
Non-Supply Pin
-0.3
VDDIO +
0.3
V
Operating Temperature, T
A
Active operation
-40
+85
°C
Passive Storage Temp. Range
≤ 65% rel. H.
-50
+150
°C
None-volatile memory (NVM)
Data Retention
T = 85°C
10
year
Mechanical Shock according
to JESD22-B111….
Duration ≤ 200µs
10,000
g
Duration ≤ 1.0ms
2,000
g
Free fall onto hard
surfaces
1.8
m
ESD
HBM, at any Pin
2
kV
CDM
500
V
Magnetic field
Any direction
> 7
T
Note:
Stress above these limits may cause damage to the device. Exceeding the specified limits may
affect the device reliability or cause malfunction.