Datasheet
Table Of Contents
- 1. Specification
- 2. Absolute maximum ratings
- 3. Block diagram
- 4. Functional description
- 5. Register Description
- 6. Digital interfaces
- 7. Pin-out and connection diagram
- 8. Package
- 10. Legal disclaimer
- 11. Document history and modification
Datasheet
BMM150 Geomagnetic Sensor
Page 52
BST-BMM150-DS001-01 | Revision 1.0 | April 2013 Bosch Sensortec
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to
third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.
9.5 Handling instructions
This device has built-in protections against high electrostatic discharges or electric fields (e.g.
2kV HBM); however, anti-static precautions should be taken as for any other CMOS component.
Unless otherwise specified, proper operation can only occur when all terminal voltages are kept
within the supply voltage range. Unused inputs must always be tied to a defined logic voltage
level.
We recommend careful handling of the WLCSP to avoid chipping from the bare silicon.
Note: It is strongly recommended to mount the WLCSP device without any underfill. The
specified electrical parameters might be influenced when using underfill material.
Please read our HSMI document for more details.