Data Sheet

HB 100 MICROWAVE SENSOR MODULE

Azimuth

Elevation

Unless noted otherwise, the specifications are measured with +5VDC, CW operation, 12 kΩ load at ambient

temperature of +25°C.

Parameter Notes Min Typ. Max Units

Frequency Setting 1 10.520 10.525 10.530 GHz

Radiated Power (EIRP) 1 12 15 20 dBm

Spurious Emission 1 -7.3 dBm

Settling Time 3 6 µSec

Received Signal Strength 2 200 µVp-p

Noise 3 5 µVrms

Antenna Beam-width (3 dB) - Azimuth 80 °

Antenna Beam-width (3 dB) - Elevation 40 °

Supply Voltage 4.75 5.00 5.25 VDC

Current Consumption 30 40 mA

Pulse Repetition Frequency 4 2 KHz

Pulse Width 4 10 µSec

Operating Temperature -15 55 °C

Weight 8 gm

Note 1: The radiated emissions of HB100 is designed to meet the requirements of Federal Communications

Commission (FCC) rules, Part 15, Section 15.245 (use within a building or to open building door)

Note 2: The Received Signal Strength (RSS) is measured at the total 2 ways path loss of 93dB.

Note 3: The noise voltages are measured from 10 Hz to 100 Hz at the output port, inside an Anechoic

chamber.

Note 4: Pulse operation.

Note 5: The design, manufacturing process and specifications of this device are subjected to change

without prior notice.

Note 6: CAUTION

: ELECTROSTATIC SENSITIVE DEVICE. Observe precautions for handling and storage.

Technical Specifications

Outline diagram

(All dimensions in mm)

VER 1.02

Elevation

A company of Singapore Technologies Engineering