Data Sheet
RB-Dfr-67
DFRobot 4WD Arduino-Compatible Platform w/Encoders
Introduction
The DFRobot 4WD Arduino-Compatible Platform w/Encoders is widely used on the world's self-
developed control panel platform. This drive method has a strong obstacle and climbing ability with
high strength aluminum alloy body. It features thick acrylic material to eliminate the heavy, fragile thin
acrylic material defects. The powerful motor performance, flexible and rapid movement is especially
suitable for outdoor grass, gravel, sand, or slope pavement.
It is very useful for robot competitions and other research projects. It's car mounting holes is
compatible with a variety of sensors. There is enough space within the car to install the battery. It is
made with the consideration to facilitate the future expansion of PTZ cameras or more degrees of
freedom manipulator. This platform comes with two sets of encoder can be precise control of the car
trip, and the closed-loop PID control.
Features
• Compatible with Hitec 311,422 servo and Pan/Tile Kit
• Compatible GP2D12 sensor installation
• Infrared sensors switch installed
• Look for line sensor installation
• URM37 ultrasonic sensor
• Compatible with standard sensor bracket on the HCR and standard head bracket