Data Sheet

12/30/2015 4WDMobilePlatformSKU:ROB0022RobotWiki
https://www.dfrobot.com/wiki/index.php?title=4WD_Mobile_Platform_SKU:ROB0022 7/24
Afterassemblingtheswitch,wewanttostartsoldering
itswires.Takesomeoftheremainingwireleftover
frombefore.Stripthewiringoffbothendsofthe
cablessothattheinsideofthewireisexposed(same
processaswiththemotorsbefore).Wewanttosolder
theexposedendofthewirestothepinsontheswitch.
Whensoldering,it’sveryimportantthatwenotethe
positionoftheswitch’spins.
Let’sdothisstepbystep.a)Connecttheswitchtothe
batterycharger.Payattentiontotheexactlocationof
bothitems.