User Manual
Table Of Contents
How to use sensor cables
There are different sensors of digital or analog signal output in the Ardublock kit.
Digital sensors should be connected to digital pins on Arduino boards through digital
sensor cables and analog ones should be connected to analog pins through analog
sensor cables. We separate these two cables with different colors.
Digital sensor cable
Analog sensor cable
Each cable includes 3 wires.
In digital sensor cable:
Green wire for Digital Signal (S)
Red wire for Power (VCC)
Black wire for Ground (GND)
In analog sensor cable:
Blue wire for Analog Signal (S)
Red wire for Power (VCC)
Black wire for Ground (GND)