Data Sheet

2
Rev. A.02 www.3peakic.com.cn
LMV321A / LMV358A / LMV324A
80μA, 1.0MHz, Micro-Power Rail-to-Rail I/O Op Amps
Order Information
Model Name
Order Number
Package
Transport Media, Quantity
Marking
Information
LMV321A
LMV321A -TR
5-Pin SOT23
Tape and Reel, 3,000
321
LMV321A -CR
5-Pin SC70
Tape and Reel, 3,000
321
LMV358A
LMV358A -SR
8-Pin SOP
Tape and Reel, 4,000
LMV358A
LMV358A -VR
8-Pin MSOP
Tape and Reel, 3,000
LMV358A
LMV324A
LMV324A -SR
14-Pin SOP
Tape and Reel, 2,500
LMV324A
LMV324A -TR
14-Pin TSSOP
Tape and Reel, 3,000
LMV324A
Absolute Maximum Ratings
Note 1
Supply Voltage: V
+
– V
–
Note 2
..............................7.0V
Input Voltage............................. V
–
– 0.3 to V
+
+ 0.3
Input Current: +IN, –IN
Note 3
.......................... ±20mA
Output Short-Circuit Duration
Note 4
…............. Infinite
Current at Supply Pins……………............... ±60mA
Operating Temperature Range........–40°C to 125°C
Maximum Junction Temperature................... 150°C
Storage Temperature Range.......... –65°C to 150°C
Lead Temperature (Soldering, 10 sec) ......... 260°C
Note 1: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to any Absolute Maximum
Rating condition for extended periods may affect device reliability and lifetime.
Note 2: The op amp supplies must be established simultaneously, with, or before, the application of any input signals.
Note 3: The inputs are protected by ESD protection diodes to each power supply. If the input extends more than 500mV beyond the power supply, the input
current should be limited to less than 10mA.
Note 4: A heat sink may be required to keep the junction temperature below the absolute maximum. This depends on the power supply voltage and how many
amplifiers are shorted. Thermal resistance varies with the amount of PC board metal connected to the package. The specified values are for short traces
connected to the leads.
ESD, Electrostatic Discharge Protection
Symbol
Parameter
Condition
Minimum Level
Unit
HBM
Human Body Model ESD
MIL-STD-883H Method 3015.8
8
kV
CDM
Charged Device Model ESD
JEDEC-EIA/JESD22-C101E
2
kV
Thermal Resistance
Package Type
θ
JA
θ
JC
Unit
5-Pin SOT23
250
81
°C/W
5-Pin SC70
395
165
°C/W
8-Pin SOP
158
43
°C/W
8-Pin MSOP
210
45
°C/W
14-Pin SOP
120
36
°C/W
14-Pin TSSOP
180
35
°C/W