Manual
Table Of Contents
- 1.Why can't the power reach the maximum power of the
- 2.No agreement can be detected using two cc lines
- 3.Use the tester to trigger fast charge, it cannot
- 4.Why does the PD protocol trigger, when selecting t
- 5.Why does it keep restarting after entering the PD
- 6.Why is the capacity displayed on the tester differ
- 7.The tester automatically restarts when the fast
- 8.Why does the fast charge protocol automatically
6
五、 Function page operation instructions
1、 Close-up page (see Figure 2)
Figure 2
description
Only the three key parameters of voltage, current and power are displayed. → indicates the
current direction. This page changes the display orientation.
Instructions
(1) << >> key
Short press: Turn the page.
(2) OK key
Long press: Switch the screen display direction.
2、 Capacity / power consumption observation page (see Figure 3)
Figure 3
description
FNB38 supports 5 sets of capacity / power consumption records, and offline voltage and
current curve records.