Manual
Table Of Contents
- 1.Why can't the power reach the maximum power of the
- 2.No agreement can be detected using two cc lines
- 3.Use the tester to trigger fast charge, it cannot
- 4.Why does the PD protocol trigger, when selecting t
- 5.Why does it keep restarting after entering the PD
- 6.Why is the capacity displayed on the tester differ
- 7.The tester automatically restarts when the fast
- 8.Why does the fast charge protocol automatically
2
Tips: The FNB38 user manual (V1.2) is applicable to firmware V1.3 and above.
Firmware version description
2019.12.24：v1.00
Original firmware.
2020.02.29：v1.10
Fix some known issues.
2020.03.20：v1.20
Fix restart issue when PD protocol is triggered.
2020.05.29：v1.30
1、Add the setting to close the startup screen;
2、Add the setting to turn off the CC pulldown;
3、Changed the judgment logic during fast charge identification;
4、In v1.20 version, some testers D+ and D- are displayed as 0V, this version is corrected;
5、During fast charge detection, it supports displaying the power of PD protocol and the number
of PDOs, and increases the detection of BC1.2 and APPLE2.1A/2.4A;
6、Add PD monitoring function;
7、Add PD E-Marker function;
8、Add QC2.0->PD protocol conversion function.