Data Sheet
RB-Dfr-260
Screws and Nuts Mounting Kit
Introduction
This mounting kit provides you different types of screws and nuts which are most commonly used in
our projects here at manufacturer. Manufacturer use them to mount circuit boards and help build robots.
These screws and nuts are put into different compartments of an adjustable compartment parts box.
Tapping Screw (M2.5x8mm) x20
Philips Truss Screw (M3x6mm) x20
Philips Truss Screw (M3x8mm) x20
Philips Truss Screw (M3x10mm) x20
Philips Truss Screw (M3x12mm) x20
Philips Truss Screw (M4x10mm) x20
M4 Nut x20
M3 Nut x80
M3 Washer x80
M3 Flange Nut x10
M3 Fly Nut x10
M3 End Cap Nut x10
M3 nylock Nut x10