Data Sheet

iEthernet

W5200

Ver. 1.2.8 13NOV2012 1. Updated description of “W5200”(P.2)

2. Added more information about “indirect interface mode at 1.1

MCU Interface Signals”(P.8)

3. Updated “Figure 1 at 1.1 MCU Interface Signals ”(P.8)

corrected Pin6~7, Pin30~39, Pin42~43

4. Updated “pin descriptions at 1.1 MCU Interface Signals”(P.8-13)

5. Updated description of “INTn at 1.1 MCU Interface Signals”(P.9)

Added Sn_IR in description

6. Updated “Socket register at 3.2 Socket registers”(P.16)

corrected from Socket 0 to Socket n

7. Updated description of Table

Added WOL in Table of “Mode register at 4.1 Common Registers”

(P.17)

Added MF in Table of “Sn_MR at 4.2 Socket Registers ”(P.24)

8. Updated description of “INTLEVEL at 4.1 Common Registers”

(P.21)

9. Corrected “ Figure24 and Table at 7.4.3 SPI Timing”(P.80)

corrected from Tcss(Hold time) to Tcss(Setup time) in Table

10. Corrected Table ,“F

SCK

and T

CHZ

at 7.4.3 SPI Timing”

(P.80)

SCK

from 80MHz to 80/33.3MHz

CHZ

from 5ns to 2.1ns

11. Corrected typo for:

from registor to resistor in notes at 1.3 Miscellaneous Signals (P.11)

from 1v80 to 1v8O(TYPO) in Table at 1.4 Power Supply Signals(P.11)

from Interrupt Mask to Interrupt at 4.2 Socket Registers (P.29)

from IR to IR2 at 4.1 Common Registers(P.21)

Ver. 1.2.9 5APR2013 1.Corrected “Figure 1at 1 Pin Assignment” (P.8)

from MDC/SPIEN to SPIEN, from MDIO to RSV

2.Corrected Table

from MDC/SPIEN to SPIEN at 1.1 MCU Interface Signals(P.10)

from MDIO to RSV at 1.3 MCU Interface Signals(P.10)

Notes: Pull-Up/Down resistor 75k ->10k

3.Corrected “Figure 2,3 at 1.4 Power Supply Signal” (P.11~12)

4. Corrected “Timeout expression at 4.1 Common Registers”(P.20)

5.Updated “Description of SOCK_LAST_ACK at 4.2 Socket