User Manual

OverLord 3D Printer User Manual
48
3.7 Maintenance of OverLord’s parts
Why:
If you do not use 3D printer more than 2 weeks, we recommend you to remove and seal the
filament, which changes its property gradually in open air, and unplug the lithium battery on
mainboard to extend its life.
How:
1. Select “Material” in main menu and remove the filament. Seal the filament in a plastic bag. Put
a small bag of drier with filament if you have one.
2. Disassemble the black acrylic, find the battery and unplug it.