User Manual

OverLord 3D Printer User Manual
12
2.1 Turn on OverLord 3D Printer
Attention: Please mind plugging direction to avoid burning main PCB down!
2.2 Start-up
OverLord runs machine Start-up at the first time you open it. Please follow the instructions
and enjoy the basic operating experience.
CAUTION：Before start-up, make sure there is nothing left on buildplate. During
start-up, OverLord operates its high temperature (220℃) moving part. To protect your
safety, please do not reach inside while OverLord is in operation.
2.3 Prepare printable models files
The first step of using 3D Printer is to make connections. Usually we build our 3D models in
computers. How do we “import” it into a 3D Printer? We need something called “3D model
slicing software”. Here is how it works. It first cuts the model into thousands slices, calculates
nozzle’s moving trajectory on each slice, plans how much material to extrude out of nozzle
Turn off status
Turn on status, blue light on
Plug in