Data Sheet

http：//www.DFRobot.com

第

页共

页

AiP31068L (LCD ) Slave Address : 0X7C.

PCA9633DP2 (RGB) Slave Address: 0XC0.

9. FUNCTION SPECIFICATIONS

9.1. Basic Setting

To drive the LCD module corretly and provide normally display, please use the following

setting:

一 N=1, 2-line display

一

F=0, 5

8 dots font

一 D=1, display on

Note:

一 These setting/commands should issue to the LCD module while start up.

一 See the Display Commands section for details.

9.2. Resetting The LCD Module

When turning on the VDD and VSS power supply, LCD module will execute the reset routine

automatically. It takes about 50ms. After the reset routine, the LCD module status will be as

follow:

一 N=1, 2-line display

一 Display clear