User Manual


PortDescription:
PWRIN:4.4~6Vpowerinputterminal.Youshouldconnectittoasolarbattery.
Themaximumoutputvoltageofthesolarbatteryshouldbeintherangeof4.4Vto
6V.
BAT:Connecta3.7Vlithiumbattery,forstoringelectricity.
VOUT:Lithiumionbatteryoutput.Connectyourelectricalequipmenttoit.
ChargingIndicator:Whentherearenobattery,thegreenLEDisONandthered
LEDisflashing.Whencharging,onlytheredLEDisON.Afterthechargingis
completed,onlythegreenLEDisON.
FAQ
Q.CanIchargemylipowithabattery,andchargeanarduinoatthesametime?
A.Notrecommanded!FortheSolarcannotproduceasteadycurrentgenerally.If
yousupplythenotsteadypowertoanArduinocard,itmaycauseunexpected
resultorgetthebootloaderlost.
Application
Material:
So
l
a
rP
a
n
e
l 

SolarCharger
3.7VPolymerLithiumIonBattery1000mAh