Data Sheet

RB-Dfr-26

DFRobot Digital Vibration Sensor

Introduction

The DFRobot Digital Vibration Sensor is a digital Plug and Play sensor blocks. It has vibration

switch

digital input module and dedicated sensor expansion boards with the Arduino in combination.

It can

sense the weak vibration signals, which can be realized with the shock interaction with

relevant works.

Product Performance:

•The conductive pin will make an instant turn-on (ON) state when touched by the outside

force

to achieve the proper vibration force, or an appropriate speed from the (partial) energy.

•No direction, any angle may burst.

•The switch is suitable for small-current circuit (secondary circuit) or (IC) of the trigger.

•At room temperature and normal use the next switch service life is up to 10 million times

(times/1sec).

PAGE 1
RB-Dfr-26 DFRobot Digital Vibration Sensor Introduction The DFRobot Digital Vibration Sensor is a digital Plug and Play sensor blocks. It has vibration switch digital input module and dedicated sensor expansion boards with the Arduino in combination. It can sense the weak vibration signals, which can be realized with the shock interaction with relevant works.
PAGE 2
Specification •On-Time: 0.1ms •Open circuit resistance: 10Mohm Pin Definition Relay module pin definition : 1. Input 2. Power 3.
PAGE 3
Connection Diagram Digital module connection diagram Sample Code #define SensorLED 13 #define SensorINPUT 3 //Connect the sensor to digital Pin 3 which is Interrupts 1.
PAGE 4
} else digitalWrite(SensorLED,LOW); } void blink()//Interrupts function { state++; }