Manual

7 | P a g e
Assembly
Although you can develop your own way to build your robot with the kit, this manual
will give you a basic guide to assembling the robot.
Basic Platform
1. Before assembly the motor, you should solder the motor wires to the motor.
Please leave a wire length of at least 15-20 cm in order to install to Romeo.
Be careful when using a soldering iron, heat shrink tubing is recommended to
protect soldered wires.(If you have condition you can use hot glue to fixed the
wires) If you do not know how to use a soldering iron, please find professional
help.
Figure 4-1
2. Figure 4-1; insert the two motors into the frame and using the given truss screws
secure it. Note the direction of the motors, ensure the holes line up properly
between the motor and truss. For details please see Figure 4-1 above.
3. All four motor are installed in the same way mentioned here.