User's Manual

4.2 Receiver Connections
z
Connect your HD display (LCD, HDTV etc.)to the Receiver using an HDMI lead.
z
Connect the power interface to the power adaptor (5V 3A) to power supply.
5 WHDI Remote Control Instructions
5.1 Register or Add
z Connect WHDI Stick (Transmitter) and Receiver to source equipment and display equipment
separately.
z Using
WHDI Remote Control at the Receiving end - Press "Menu" or "Add"; choose "Add
video source" in "Setup" interface
z "Activat
e registration of video transmitter unit" reveals on the display screen
z Short
press (within 1s) Register button of WHDI Stick, Status LED flickers
z After search
ing the Transmitter, the display equipment will reveal confirm information
z Usin
g WHDI Remote Control to press OK
z The re
gister state will be revealed on the display equipment
z After about
30 seconds the register finishes
z N
etwork will be connected automatically and transmit audio and video signals after
registration.
z No
more than 8 transmitters can be added as the above procedures
5.2 Delete Transmitters
z Press "Source" to check the Transmitter
z Press "
Delete" or "Menu" to select "Remove video source"
z Select
the device to be deleted and press "OK"
z A
fter deleting the device, press "Source" to ensure the device is no more exist
z Other devices
can be also deleted as the above procedures
5.3 Modify source equipment name
z Press "Menu" to select "Modify video source name" on the screen
z Select
the source to be modified and press Up and Down button to modify
z Press
the Right and Left button to select characters to be modified; pay attention the name of
7