User's Manual

the power switch.
●W
hen the WHDI transceiver is not used, disconnect the power switch to prevent electric shock
or fire.
WARNING:
●This product should not be exposed to dripping or splashing. Objects filled with liquids, such as
vases, should not be placed on the product.
●P
ut the receiver/transmitter in a property ventilated area, away from direct sunlight or any source
of heat.
●W
ater Exposure: To reduce the risk of fire or electric shock, do not expose the
receiver/transmitter to rain or moisture.
DECLARATION OF CONFORMITY
This device complies with Part 15C and Part 15E of FCC Rules.
Part 15: Subpart C—Radiated Emission Limits, Additional Provisions.
Part 15: Subpart E—Unlicensed National Information Infrastructure Devices.
This device complies with relative criteria CE certification.
EN 60950-1：
2006
Information technology
Equipment --- Safety ---
Part 1: General requirements
EN 300440-01 (V1.6.1)
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Short range devices;
Radio equipment to be used in the 1 GHz to 40 GHz frequency range;
Part 1: Technical characteristics and test methods
EN 301489-03 (V1.4.1)
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 3: Specific conditions for Short-Range Devices (SRD)
Operating on frequencies between 9 kHz and 40 GHz
EN 301489-17(V2.1.1)
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment;
Part 17: Specific conditions for Broadband Data Transmission Systems
EN 301893 (V1.5.1)
Broadband Radio Access Networks (BRAN);
5 GHz high performance RLAN;
Harmonized EN covering the essential requirements of article 3.2
of the R&TTE Directive
3