User`s manual

A
Using the Suspend to RAM Function
83
A.1 Using the Suspend to RAM Function
1. Select “Power Management Setup” in the main menu screen and
press <Enter>.
2. In the “ACPI Function” field, select “Enabled”.
3. In the “ACPI Suspend Type” field, select “S3(STR)”.
Appendix A - Using the Suspend to RAM Function
X
X
CMOS Setup Utility - Copyright (C) 1984-1999 Award Software
Power Management Setup
ACPI Function
ACPI Suspend Type
Power Management
Video Off Method
Video Off In Suspend
Suspend Mode
HDD Power Down
Soft-Off By PWR-BTTN
Resume on PCI Event
Resume on Ring
Resume on LAN
Resume on Alarm
Date(of Month) Alarm
Time (hh:mm:ss) Alarm
Enabled
S3(STR)
User Define
DPMS
Yes
Disabled
Disabled
Instant-Off
Disabled
Disabled
Disabled
Disabled
0
0 : 0 : 0
Item Help
Menu Level
↑↓→← Move
F6:Fail-Safe Defaults F7:Optimized Defaults
F1:General HelpEnter:Select
F5:Previous Values
+/-/PU/PD:Value
F10:Save
ESC:Exit
4. Press <Esc> to return to the main menu.
5. Select “Save & Exit Setup” and press <Enter>. Type <Y> and
press <Enter>.
6. Install Windows
®®
®®
®
98 by typing the following parameter. This is
to ensure that the ACPI function is supported.
[drive]:>setup /p j
If you have previously installed Windows
®®
®®
®
98, you need to
upgrade the system in order to support ACPI. Please contact
Microsoft for upgrade information.