User`s manual

108

Supported Software

F6 Floppy Configuration Utility

This is used to create a ﬂ oppy driver diskette needed when you install Windows

XP using the F6 installation method. This will allow you to install the operating

system onto a hard drive when in AHCI mode.

1. Insert a blank ﬂ oppy diskette.

2. Locate for the drivers in the CD then copy them to the ﬂ oppy diskette. The

CD includes drivers for both 32-bit and 64-bit operating systems. The path to

the drivers are shown below.

32-bit

CD Drive:\AHCI_RAID\F6FLOPPY\f6ﬂ py32

64-bit

CD Drive:\AHCI_RAID\F6FLOPPY\f6ﬂ py64