User`s manual

43
2
Hardware Installation
PS/2
KB/ MS
The Serial ATA connectors are used to connect Serial ATA devices. Connect one
end of the Serial ATA cable to a SATA connector and the other end to your Serial
ATA device.
BIOS Setting
Confi gure the Serial ATA drives in the Advanced menu (“SATA Confi guration” sub-
menu) of the BIOS. Refer to chapter 3 for more information.
SATA (Serial ATA) Connectors
7
RXN
GND
TXP
TXN
GND
1
RXP
GND
Features
• SATA 0, SATA 1, SATA 4 and SATA 5 support data transfer rate up to 3Gb/s
SATA 4 provides adequate space for SATA DOM
SATA 2.0 3Gb/s
SATA 4 provides adequate
space for SATA DOM
SATA 5
SATA 4
SATA 1
SATA 0