User`s manual

40
2
Hardware Installation
The Serial ATA connectors are used to connect Serial ATA devices. Connect one
endoftheSerial ATAcable toaSATAconnectorandthe otherendtoyourSerial
ATAdevice.
BIOS Setting
Congure the Serial ATA drives in the Advanced menu (“IDE Conguration” sub-
menu)oftheBIOS.Refertochapter3formoreinformation.
SATA (Serial ATA) Connectors
7
RXN
GND
TXP
TXN
GND
1
RXP
GND
SATA4 SATA3
SATA5 SATA2
SATA2.03Gb/s
Features
• SATA0andSATA1supportdatatransferrateupto6Gb/s
• SATA2toSATA5supportdatatransferrateupto3Gb/s
SATA4providesadequatespaceforSATADOM
• IntegratedAdvancedHostControllerInterface(AHCI)controller
• SupportsRAID0,RAID1,RAID5andRAID10
SATA1
SATA0
SATA3.06Gb/s