User`s manual

20
2
Hardware Installation
Installing QB701-B Series onto a Carrier Board
1. The photo below shows the locations of the mounting holes and the bolts al-
ready fi xed in place.
Important:
The carrier board used in this section is for reference purpose only and
ma
y not resemble your carrier board. These illustrations are mainly to
guide you on how to install QB701-B Series onto the carrier board of
your choice.
2. Grasping QB701-B Series by its edges, insert it into the carrier board, and
you will hear a distinctive¨click¨ indicating QB701-B Series is correctly locked
into position.
Mounting hole
QB701-B Series
Carrier board
Standoff Bolts