User`s manual

ManualsBrandsDFI ManualsComputer equipmentP5BV3+/e

Award BIOS Setup Utility

3.1.4 Power Management Setup

The Power Management Setup allows you to configure your system to

most effectively save energy. If you like to use the soft power down

feature of Windows 95, you must enable the Power Management

below. Select Min. Power, Max. Power or User Defined. Either one can

be used as long as it is NOT disabled.

Power Management

This category allows you to select the type (or degree) of power saving

by changing the length of idle time that elapses before the Standby

mode and Suspend mode are activated.

Disable No power management. Disables the Standby

and Suspend modes.

Min. Power Saving Minimum power management. Standby Mode =

1 hr., and Suspend Mode = 1 hr.

Max. Power Saving Maximum power management. Standby Mode

= 1 min., and Suspend Mode = 1 min.

User Define Allows you to set each mode individually. When

enabled, each option ranges from 1 min. to 1

hr.

The settings on the screen are for reference only. Your version may not be

identical to this one.

ROM PCI/ISA BIOS

POWER MANAGEMENT SETUP

AWARD SOFTWARE, INC.

Power Management

PM Control by APM

Video Off Method

Video Off After

Standby Mode

Suspend Mode

HDD Power Down

: User Define

:Yes

: DPMS

: Suspend

: Disabled

ESC

: Quit

: Help

: Old Values

: Load Fail-Safe Settings

: Load Optimal Settings

PU/PD/+/-

(Shift) F2

: Select Item

: Modify

: Color

↑ ↓ → ←

** PM Events **

IRQ3 (COM 2)

IRQ4 (COM 1)

IRQ5 (LPT 2)

IRQ6 (Floppy Disk)

IRQ7 (LPT 1)

IRQ8 (RTC Alarm)

IRQ9 (IRQ2 Redir)

IRQ10 (Reserved)

IRQ11 (Reserved)

IRQ12 (PS/2 Mouse)

IRQ13 (Coprocessor)

IRQ14 (Hard Disk)

IRQ15 (Reserved)

: Primary

: Disabled

: Secondary

: Primary

: Disabled