User`s manual

Hardware Installation

Power-on Select

JP6 is used to select the method of powering on the system. If you

want the system to power-on whenever AC power comes in, set

JP6 pins 2 and 3 to On. If you want to use the power button, set

pins 1 and 2 to On.

When using JP6 “Power On” feature to power the system back on

after a power failure occurs, may not power on the system if the

power lost is resumed within 5 seconds (power flicker).

Note:

In order to ensure that power is resumed after a power failure

that may occur within a 5 second period, JP6 should be set to

pins 2-3 and the “PWRON After PWR-Fail” in CMOS is set to

“Power On”.

2-3 On:

Power-on via

AC power

1-2 On:

Power-on via

power button

(default)

JP6