User`s manual

71
3
BIOS Setup
Time (hh:mm:ss) Alarm
This is used to set the time you would like the system to power-
on. If you want the system to power-on everyday as set in the
“Date (of Month) Alarm” field, the time set in this field must be
later than the time of the RTC set in the Standard CMOS Fea-
tures submenu.
Power On Function
This field allows you to use the PS/2 keyboard or PS/2 mouse to
power-on the system.
Button Only Default setting. Uses the power button to power
on the system.
Password When this option is selected, set the password
you would like to use to power-on the system in
the “KB Power On Password” field.
Hot Key When this option is selected, select the function
key you would like to use to power-on the sys-
tem in the “KB Power On Hot Key” field.
Mouse Move When this option is selected, move the mouse to
power-on the system.
Mouse Click When this option is selected, double-click the
mouse button to power-on the system.
Any Key Press any key to power-on the system.
Keyboard 98 When this option is selected, press the “wake up”
key of the Windows

98 compatible keyboard to
power-on the system.
KB Power On Password
Move the cursor to this field and press <Enter>. Enter your pass-
word. You can enter up to 5 characters. Type in exactly the same
password to confirm, then press <Enter>.
The power button will not function once a keyboard password
has been set in this field. You must type the correct password to
power-on the system. If you forgot the password, power-off the
system and remove the battery. Wait for a few seconds and in-
stall it back before powering-on the system.