User`s manual

BIOS Setup

ECP Mode Use DMA

This is used to select the DMA channel of the parallel port.

Game Port Address

This field is used to select the game port’s address.

Midi Port Address

This field is used to select the midi port’s address. If you have

selected the midi port’s address, you may select its IRQ in the

“Midi Port IRQ” field.

Midi Port IRQ

This field is used to select the midi port’s IRQ.

3.1.4.4 USB 2.0 Controller

The USB 1.1 function is always enabled. However, if you are using

USB 2.0, you must set this field to Enabled.

3.1.4.5 USB Keyboard Support

If you are using a USB keyboard under DOS, set this field to

Enabled. This field can be configured only if the “USB Controller”

field is enabled.

3.1.4.6 Init Display First

This field is used to select whether to initialize the AGP or PCI

first when the system boots.

AGP When the system boots, it will first initialize the

AGP.

PCI Slot When the system boots, it will first initialize PCI.