User`s manual

63
3
BIOS Setup
3.1.4.3 Onboard Super IO Device
Move the cursor to this field and press <Enter>. The following
screen will appear.
The settings on the screen are for reference only. Your version may not be identical
to this one.
Onboard FDC Controller
Enabled Enables the onboard floppy disk controller.
Disabled Disables the onboard floppy disk controller.
Onboard Serial Port 1 and Onboard Serial Port 2
Auto The system will automatically select an I/O ad-
dress for the onboard serial port 1 and serial
port 2.
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3 Allows you to
manually select an I/O address for the onboard
serial port 1 and serial port 2.
Disabled Disables the onboard serial port 1 and/or serial
port 2.
UART Mode Select
The system board supports IrDA function for wireless connectiv-
ity between your computer and peripheral devices. You may not
use IrDA and the COM 2 serial port at the same time. If you are
using the COM 2 serial port, make sure this field is set to Nor-
mal.