User`s manual
71
!
Award BIOS Setup Utility
SPP
Allows normal speed operation but in one direction only.
ECP (Extended Capabilities Port)
Allows parallel port to operate in bidirectional mode and at a
speed faster than the normal modes data transfer rate.
EPP (Enhanced Parallel Port)
Allows bidirectional parallel port operation at maximum speed.
PntMode
Allows parallel port to operate in bipolar mode.
If you selected EPP, the EPP Mode Select field is configurable. If you
selected ECP, the ECP Mode Use DMA field is configurable. If you
selected ECP+EPP, both EPP Mode Select and ECP Mode Use
DMA are configurable.
EPP Mode Select
The options are EPP1.9 and EPP1.7. Default setting: EPP1.7.
ECP Mode Use DMA
This is used to select a DMA channel for the parallel port. The
options are 1 and 3. Default setting: 3.
PWR Lost Resume State
Keep Off When power returns after an AC power failure, the
systems power is off. You must press the Power
button to power-on the system.
Turn On When power returns after an AC power failure, the
system will automatically power-on.
Last State When power returns after an AC power failure, the
system will return to the state where you left off
before power failure occurs. If the systems power is
off when AC power failure occurs, it will remain off
when power returns. If the systems power is on
when AC power failure occurs, the system will power-
on when power returns.