User`s manual

ManualsBrandsDFI ManualsComputer equipmentLT600-D

Introduction

Processor

Chipset

System Memory

Expansion Slots

Graphics

Audio

LAN

Serial ATA

IDE Interface

• LGA 775 socket for:

- Intel

Core

2 Duo

- Intel

Pentium

- Intel

Pentium

4 or Intel

Celeron

- Intel

Celeron D

• Supports Intel Enhanced Memory 64 Technology (EMT64T)

• Supports Enhanced Intel SpeedStep Technology (EIST)

• Supports Intel Hyper-Threading Technology

• Supports 1066/800/533MHz FSB

• Intel

chipset

- Northbridge: Intel

945G Express chipset

- Southbridge: Intel

ICH7R (LT600-DR)

Intel

ICH7 (LT600-D)

• Four 240-pin DDR2 DIMM sockets

• Supports DDR2 533 and DDR2 667 DIMMs

• Supports dual channel (128-bit wide) memory interface

• Supports up to 4GB system memory

• Supports non-ECC x8 and x16 DIMMs

• Supports up to 1Gb DRAM densities

• Supports unbuffered DIMMs

• 1 PCI Express x16 slot

• 6 PCI slots

• Integrated Intel Graphics Media Accelerator 950

• Realtek ALC662 5.1-channel High Definition Audio CODEC

•

Six channel DAC support 16/20/24-bit PCM format for 5.1

channel audio solution

• Two stereo ADC support 16/20-bit PCM format

• All DAC/ADC support independent 44.1k/48k/96kHz sample

rate

• 44.1k/48k/96kHz S/PDIF-out interface

• Two Realtek RTL8111B PCI Express Gigabit controllers

• Supports 10Mbps, 100Mbps and 1Gbps data transmission

• IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) compliant

• Supports four SATA (Serial ATA) interfaces which are compliant

with SATA 1.0 specification

• SATA speed up to 3Gb/s

• RAID 0, RAID 1, RAID 0+1 and RAID 5 (LT600-DR only)

• One IDE connector supports up to two UltraDMA 100Mbps

IDE devices

• Supports PIO IDE transfers up to 16MB/sec

Chapter 1 - Introduction

Specifications