User`s manual
Table Of Contents
- Copyright
- Trademarks
- FCC and DOC Statement on Class B
- Table of Contents
- About this Manual
- Warranty
- Static Electricity Precautions
- Safety Measures
- About the Package
- Before Using the System Board
- Chapter 1 - Introduction
- Chapter 2 - Hardware Installation
- Chapter 3 - BIOS Setup
- Chapter 4 - Supported Software
- Appendix A - NLITE and AHCI Installatoin Guide
- Appendix B - Watchdog Timer
- Appendix C - System Error Message
- Appendix D - Troubleshooting
68
3
BIOS Setup
Hardware Health Configuration
This section is used to congure the hardware monitor function.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+
-
Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Hardware Health Conguration
Case Open Detection
System Temperature
CPU Temperature
SYSFAN Speed
CPUFAN Speed
Vcore
5V
1.05V
1.5V
12V
VSB
VBAT
CPUFAN Mode Setting
CPUFAN PWM Control
Advanced
[Disabled]
:48
o
C/118
o
F
:60
o
C/140
o
F
:NA
:6250 RPM
:1.184 V
:5.222 V
:1.056 V
:1.840 V
:12.355 V
:3.440 V
:3.088 V
[Manual Mode]
[255]
Case Open Detection
Set this eld to Enabled to allow the system to alert you of a chassis intru-
sion event.
System Temperature to VBAT (V)
These elds will show the temperature, fan speed and output voltage of the
monitored devices or components.
CPU Fan Mode Setting
Selects the CPU fan’s mode. The options are Manual Mode and Thermal
Cruise Mode.
CPU Fan PWM Control
This is the PWM’s duty cycle control. Enter the CPU fan’s speed in this eld.
The higher the value, the faster the CPU fan’s speed.
Enabled for Case Open
Detection. If Case is
open, system will show
warning message and beep
warning.