User`s manual
Table Of Contents
- Copyright
- Trademarks
- FCC and DOC Statement on Class B
- Table of Contents
- About this Manual
- Warranty
- Static Electricity Precautions
- Safety Measures
- About the Package
- Before Using the System Board
- Chapter 1 - Introduction
- Chapter 2 - Hardware Installation
- Chapter 3 - BIOS Setup
- Chapter 4 - Supported Software
- Appendix A - NLITE and AHCI Installatoin Guide
- Appendix B - Watchdog Timer
- Appendix C - System Error Message
- Appendix D - Troubleshooting
62
3
BIOS Setup
CPU Configuration
This section is used to congure the CPU. It will also display the detected CPU
information.
Disabled for WindowsXP
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+
-
Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Congure advanced CPU settings
Module Version:3F.1A
Manufacturer : Intel
Intel(R) Atom(TM) CPU D525 @ 1.80GHz
Frequency : 1.80GHz
FSB Speed : 800MHz
Cache L1 : 48 KB
Cache L2 : 1024 KB
Ratio Actual Value:9
Max CPUID Value Limit [Disabled]
Execute-Disable Bit Capability [Enabled]
Hyper Threading Technology [Enabled]
Advanced
Max CPUID Value Limit
Set this eld to Disabled when using Windows XP. Set this eld to Enabled
when using legacy operating systems so that the system will boot even when
it doesn’t support CPUs with extended CPUID function.
Execute-Disable Bit Capability
When this eld is set to Disabled, it will force the XD feature ag to always
return to 0.
Hyper Threading Technology
Enable this eld for Windows XP and Linux which are optimized for Hyper-
Threading technology. Select disabled for other OSes not optimized for Hyper-
Threading technology. When disabled, only one thread per enabled core is
enabled.