User`s manual

46
2
Hardware Installation
Chassis Instrusion Connector
The board supports the chassis intrusion detection function. Connect the chas-
sis intrusion sensor cable from the chassis to this connector. When the system’s
power is on and a chassis intrusion occurred, an alarm will sound. When the
system’spower is off and a chassis intrusion occurred, the alarm will sound only
whenthesystemrestarts.
Hardware Monitor for Windows
Install the “Hardware Monitor for Windows” utility. By default, the chassis intru-
siondetectionfunctionisdisabled.Whenenabled,awarningmessagewillappear
when the chassis is open. The utility can also be congured so that a beeping
alarm will sound when the chassis is open. Refer to the “Hardware Monitor for
Windows”sectioninchapter4formoreinformation.
Chassissignal
Ground
2 1