User`s manual

34
2
Hardware Installation
TheVGAportisusedforconnectingaVGAmonitor.Connectthemonitor’s15-pin
D-shell cable connector to the VGA port. After youplug the monitor’scable con-
nector into the VGA port, gently tighten the cable screws to hold the connector
inplace.
BIOS Setting
Congure the onboard VGA in the Chipset menu (“North Bridge Conguration”
submenu)oftheBIOS.Refertochapter3formoreinformation.
Driver Installation
Installthegraphicsdriver.Refertochapter4formoreinformation.
VGA Port
VGA
Note:
RefertoConguringDisplayDevicesinchapter5formoreinformation.