User`s manual

BIOS Setup

3.2 NVRAID BIOS

The NVRAID BIOS utility is used to configure and manage RAID on

Serial ATA drives and Parallel ATA drives.

Important:

Before you run the NVIDIA RAID BIOS utility, make sure the

RAID function in the Integrated Peripherals submenu (“IDE

Function Setup” section) of the Award BIOS is configured

properly.

After you power up the system and all hard disk drives have been

detected, the NVRAID BIOS status message screen will appear.

Press the <F10> key to enter the utility. The utility allows you to

build a RAID system on SATA drives and Parallel ATA drives.